Blitz R-VIT Type 2 User Manual download pdf (Page 14)

Page 14 of 29

WARNING-All images and text in this manual is the property of Blitz Co., Ltd. (Japan).

No part of this manual may be reproduced, stored in retrieval systems, or transmitted in any way

without prior written permission of Blitz Co., Ltd. (Japan).

I. Bar Graph Display Mode.

First Monitoring item

First item

present value

Second item unit

Second Monitorin

item

Second item present

value

Fi t it k l

Meter

’

s Scale

BAR GRAPH

Ex 3:

First item

unit

1. To display the BAR GRAPH DISPLAY MODE, select and enter [BAR GRAPH] by scrolling up or

down at the MAIN MENU.

2. The center digital display shows the present value for the first monitoring item. The lower digital

display shows the present value for the second monitoring item or the peak value for the first

monitoring item and it can be also concealed

3. The ELLIPSE METER DISPLAY MODE displays the first monitoring item’s value.

4. Monitoring item configuration method

z Press the ENTER button and it will select the first monitoring item (Ex 3: IN-MF).

z Scroll Up or Down to select the desired monitoring item, then press ENTER to confirm.

z By pressing downward it will scroll from [①Vehicle speed] to [⑱ Exhaust temperature

sensor

] and backwards.

z After setting the first monitoring item, it will automatically go to set up the second

monitoring item. (Ex 3: WATER)

z Scroll Up or Down to select the desired monitoring item, then press ENTER to confirm.

※ By pressing downward it will scroll from [

①Vehicle speed] ～ [⑱ Exhaust

temperature sensor

] and backwards. However, it will set the first monitoring item’s

peak value

only when setting the second monitoring item.

※ While setting the second monitored item, pressing downwards will display from [①

Vehicle speed] ～ [⑱

Exhaust temperature sensor] → [first monitored item’ peak

value] → [second monitored item BLKN] → and back again to [①Vehicle speed]

z After setting the second monitoring item, the bar graph’s max value will be selected.

z Press UP or DOWN to select the bar graph’s scale (RPM = X 100); then, press ENTER to

confirm the scale.

z The BAR GRAPH DISPLAY MODE will start to monitor and display

z It will go to the prior step by pressing the left button.

[Warning] The R-VIT will go back to its prior monitoring state by keeping it for over 5 seconds without

any operation. However, the changes will take place.

5. Operation Method (It is the same as the Needle Meter Method)

Online Manual Not For Resale Purposes

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Comments to this Manuals

No comments

Blitz R-VIT Type 2 User Manual Page 14

Comments to this Manuals

Related products and manuals for Equipment Blitz R-VIT Type 2